Blue Sea Systems Switch Battery e-Series Dual Circuit
Blue Sea Systems Switch Battery e-Series Dual Circuit
RRP ex VAT
Please ask for AvailabilityProduct code: 5510E-BSS
Manufacturer: Blue Sea Systems
Simultaneously switches two isolated battery banks
- Ignition protected—safe for installation aboard gasoline powered boats
- Case design allows surface or rear panel mounting
*** For trade enquiries please contact us using the form below ***
Installation Instructions
Specifications |
|
|---|---|
| Switch Type | Dual Circuit |
| Color | Red |
| Switch Positions | 2 |
| Battery Combine | No |
| Alternator Field Disconnect | No |
| Maximum Voltage | 32V DC |
| Terminal Stud Torque | 140 in-lb (15.82 Nm) |
| Continuous Rating | 350A |
| Intermittent Rating | 525A (5 min) |
| Cranking Rating 30 sec | 700A per circuit |
| Battery Inputs | 2 |
| Cable Clearance For 4/0 AWG Cables | 1.10in (27.94 mm) |
| Cable Size to Meet Ratings | 4/0 AWG (120mm²) |
| Mounting Holes | Accept 1/4" (M6) Screw |
| Stud Material | Tinned Copper |
| Terminal Stud Size | 3/8" - 16 (M10) |
| Weight | 1.16lb (0.53 kg) |
| Weight | 1.30lb (0.59 kg) |
Features
- Switches positive and negative terminals of one battery bank, or two isolated battery banks
- For switching battery banks in applications requiring high power output, reliability, and low heat generation
Tin-plated copper studs:
- 3/8"-16 (M10) provide maximum conductivity and corrosion resistance
- One-piece to reduce risk of overheating
- 7/8" (22.22mm) length to accept multiple cable terminals
Case design:
- Allows surface mounting or rear panel mounting
- Accepts up to 4/0 AWG (95mm²) battery cables
Installation Instructions
Specifications |
|
|---|---|
| Switch Type | Dual Circuit |
| Color | Red |
| Switch Positions | 2 |
| Battery Combine | No |
| Alternator Field Disconnect | No |
| Maximum Voltage | 32V DC |
| Terminal Stud Torque | 140 in-lb (15.82 Nm) |
| Continuous Rating | 350A |
| Intermittent Rating | 525A (5 min) |
| Cranking Rating 30 sec | 700A per circuit |
| Battery Inputs | 2 |
| Cable Clearance For 4/0 AWG Cables | 1.10in (27.94 mm) |
| Cable Size to Meet Ratings | 4/0 AWG (120mm²) |
| Mounting Holes | Accept 1/4" (M6) Screw |
| Stud Material | Tinned Copper |
| Terminal Stud Size | 3/8" - 16 (M10) |
| Weight | 1.16lb (0.53 kg) |
| Weight | 1.30lb (0.59 kg) |
Features
- Switches positive and negative terminals of one battery bank, or two isolated battery banks
- For switching battery banks in applications requiring high power output, reliability, and low heat generation
Tin-plated copper studs:
- 3/8"-16 (M10) provide maximum conductivity and corrosion resistance
- One-piece to reduce risk of overheating
- 7/8" (22.22mm) length to accept multiple cable terminals
Case design:
- Allows surface mounting or rear panel mounting
- Accepts up to 4/0 AWG (95mm²) battery cables
Get In Touch
At Fischer Panda, we pride ourselves on the quality of our customer service.
We want to support you with all of your requirements so please contact us to discuss further.
Contact Form
SHOPToken